同分异构体对苯和丁醇的偶极相互作用的影响

Sound velocity, density, and viscosity values were measured at 303 K in four binary systems of benzene ＋1-, 2-, tert-, or iso-butanol. From these data, acoustical parameters, such as adiabatic compressibility, free length, free volume, and internal pressure were estimated using the standard relations. The results are interpreted in terms of molecular interaction between the components of the mixtures. Observed excess value in all the mixture indicates that the molecular symmetry existing in the system is highly disturbed by the nonpolar benzene molecules. Interaction energy terms of the statistical mixing are also verified for these binary systems and the dipole-dipole interactions are found to be predominantly present and are sharply affected by the isomeric forms of butanol.     

添加剂对染料敏化太阳电池电解质性能的影响

以N-甲基咪唑、苯并咪唑、叔丁基吡啶和离子液体1-甲基-3-乙基咪唑三氟乙酸盐(EMITA)作为染料敏化太阳电池(DSCs)电解质溶液中的添加剂, 使用超微电极通过循环伏安法研究其对液体电解质中I-3和I-氧化还原行为的影响, 通过电化学阻抗谱研究了上述四种添加剂对Pt电极电解质界面的影响. 结果表明, 添加剂EMITA的加入使I-3在电解质中的扩散系数减小, Pt电极电解质界面上的界面传输电阻Rct增大, 电解质的电阻降低; 光伏性能测试表明, EMITA的添加提高了DSCs的开路电压和填充因子, 其DSCs的光电转换效率达到了5.72%.     

海洋微生物对316不锈钢的电化学腐蚀行为

采用自腐蚀电位、电化学极化曲线、电化学阻抗谱技术研究了316不锈钢在无菌培养基介质和海水微生物接种培养有菌培养基介质中不同周期的腐蚀行为．结果表明,316不锈钢电极在有菌介质中比在无菌介质中的腐蚀电流密度大,腐蚀电位负移,微生物加速了不锈钢的腐蚀速度．随着浸泡时间的增加,有菌介质中的不锈钢电极极化电阻值逐渐减小,表明了海洋微生物的附着和繁殖加速了316不锈钢的腐蚀速率,降低了其在海洋环境中的耐蚀性．     

Nanocrystalline nitrogenated diamond: An <Emphasis Type="Italic">N</Emphasis>-type electrode material

Nitrogenated nanocrystalline diamond thin films are grown from arc-plasma in CH₄/Ar/H₂/N₂-gas mixtures and characterized by AFM-and Raman spectroscopy, X-ray diffraction and resistivity measurements. It is shown by Mott-Schottky plots taken in indifferent electrolyte (0.5 M H₂SO₄) that the behavior of the nitrogenated nanocrystalline diamond thin-film electrodes resembles that of n-type semiconductor; the donor effective concentration therein is estimated.     

Study of ion adsorption at passive iron by using the impedance and photoadmittance methods

Intensity-modulated photocurrent (photoadmittance) and electrochemical impedance of anodicoxidized iron electrode in neutral nitrate solutions and in the presence of Ba²⁺, Ca²⁺, Cl^?, and C₆H₅COO^? (benzoate) are studied. It is shown that the ion adsorption at passive iron affects but slightly the system’s impedance; by contrast, it affects the photocurrent value significantly: when adsorbing, the anions increase the photoeffect, while the cations decrease it. These effects are associated with the potential drop redistribution in the Helmholtz layer and the film. The dissimilar changes of the generation current in the presence of similarly charged ions at their equal concentration evidence their different adsorption activity. The correlation between the generation current and surface-active ion concentration in solution is found. The photoelectrochemical spectroscopy allows evaluating qualitatively the surface-active ion adsorption at the passive iron and judging on the ion adsorption by the dependence of the generation current on the ion concentration.     

Study of copper electrodeposition from acidic sulfate and perchlorate electrolytes using faradaic impedance spectroscopy and quartz microbalance methods

Copper electrodeposition from acidic sulfate and perchlorate electrolytes is studied. Some measurements are performed with addition of gelatine as a surface active agent. In the course of microgravimetric studies, decrease of the derivative of the electrode mass variation by the consumed charge is found, as compared to the value corresponding to the current efficiency of 100%. The latter is in part related to the effect of the double layer structure on the rate of the consecutive stages of copper recharge (Cu²⁺ + e → Cu⁺) and deposition (Cu⁺ + e → Cu). This effect is most pronounced in the case of solutions containing surface active agents that cause hyperpolarization and extension of the monovalent copper stability range as a result of their adsorption on the electrode surface. The faradaic impedance spectra obtained in sulfate and perchlorate electrolytes evidence at least the difference in the rate constants of recharge and copper deposition in these electrolytes. In both cases, the recharge rate constant is considerably lower than the deposition rate constant. The difference between these constants decreases noticeably at the addition of surface active agents.     

The effect of partial charge transfer on the electrochemical turbulent noise

Theoretical analysis of the effect of electrode potential on the spectral density of random alternating current emerged in electrochemical cell under the action of turbulent pulsations of the electrolyte solution velocity is carried out. An impedance model of metal electrode dissolution reaction, including two adsorption stages, is suggested, with allowance for the oxidized ion diffusion in electrolyte solution. It is known that in terms of the Ershler-Randles model, at low frequencies the experimentally measured slope of bilogarithmic frequency dependence of spectral density equals 3, which is characteristic of the diffusion control; at high frequencies the slope equals 4, which is characteristic of the kinetic control. It is shown that for the model of impedance of the two-stage adsorption oxidation process, in the middle segment of the spectrum the local slope must decrease down to 2, provided the first oxidation stage, which proceeds within the inner electrical double layer, is slow; the local slope must increase up to 6 (or 5, for diffusion control), provided the second oxidation stage (the partially oxidized ion desorption to solution) is slow. The “height” and “width” of the slope local changes appeared explicitly depending on the parameters of the partial charge transfer. This makes the turbulent noise method somewhat superior to the impedance method in the studying of the above-specified reaction type.     

Voltammetry of Undiluted Red‐Ox Systems. Electrochemical ESR‐ and Electrochemical Impedance Spectroscopy Evidence for Formation of Ionic Liquid at Microelectrode Surface

It is believed that voltammetry of undiluted red‐ox liquids can lead to the formation of stable thin layers of ionic liquids at the microelectrode surface. Such situation was postulated for several liquids (solvents), however, so far no hard evidence supporting this expectation was obtained. By using electron spin resonance in combination with voltammetric experiments and electrochemical impedance spectroscopy we have shown that the concentration of the cation radicals at the microelectrode surface may be high (nitrobenzene) and the overall resistance of the solution abruptly drops (methanol) when the potential at the microelectrode corresponds to the wave plateau of the undiluted organic liquid. Both facts constitute a good evidence for the formation of microlayers of ionic liquids at the microelectrode surface during electrolysis of undiluted red‐ox systems.     

Chitosan–poly(acrylic acid) nanofiber networks prepared by the doping induction of succinic acid and its ammonia‐response studies

Chitosan–poly(acrylic acid) (CS–PAA) composite membrane with a 3D network nano‐structure was prepared using an electrostatic interaction process by adding succinic acid as a branch promoter. Variations of the final solution pH values, concentration of CS, and PAA/CS volume ratio were examined systematically for their effects on average fiber diameter size, intensity of surface charge, and tendency of network formation. It was found that nanofiber size was affected by the mixing ratio of PAA and CS, the concentration of CS, and the final pH of the CS–PAA solution. The smallest diameter size distribution of the scaffold can be obtained when the PAA/CS ratio is in the range of 2:1–1:2 in a pH 3 environment. Negative charge nanofibers prepared using PAA and CS in a ratio of 2:1 in pH 3 environments had an average diameter of 215 nm. The formation of the interconnecting 3D self‐organized network structure can be built up with limited parasitic branching by crystallized succinic acid. The gas response to ammonia, including sensitivity and response time, was evaluated using impedance spectroscopy at room temperature. The results of sensing experiments indicate that the sensitivity of nanofibrous membrane (NM)‐coated sensors was eight times higher than that of continuous film‐coated sensors. NM‐coated sensors exhibited high sensitivity towards a low concentration of ammonia, as low as 50 ppm at a relative humidity of 45%. Copyright © 2008 John Wiley & Sons, Ltd.